Cables to Go 30534 Bedienungsanleitung PDF herunterladen (Seite 16)

Video Server Cable Definition and Requirements

The Network Video Server requires a network cable to carry the video signals to the

remote viewing site.

Network Cable

Network cable max length is 328 feet (100m). To avoid signal attenuation, Securgen

recommends that you do not exceed 295 feet (90m). You can use Power over Ethernet

(PoE) to power compatible cameras using network cables up to the max length.

Power Connection

Make sure the power cable is correctly and firmly connected to the video server.

Power Wire Length Specifications

Wire

Gauge

Maximum

Distance

Wire

Gauge

Maximum

Distance

22 27 feet 14 175 feet

20 44 feet 12 279 feet

18 69 feet 10 444 feet

16 110 feet

Note Ensure that the power supply corresponds with the power requirements of the

video server or the device may be damaged. Contact a qualified maintenance

engineer with any problems.

Ethernet Cable Connection

Connect one end of the CAT 5 Ethernet cable to the RJ-45 connector of the camera and

the other end of the cable to the network switch or router.

Note In some cases, you may need to use an Ethernet crossover cable when

connecting the video server directly to the recorder.

Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit,

check the LAN connection.

The Green link light indicates a good network connection.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 58 59

Keine Kommentare

Cables to Go 30534 Bedienungsanleitung Seite 16